SID and Java Instance ID related dilema during System Copy

by **One_Idea** » Mon May 25, 2009 2:00 pm

Following is latest dev_disp with actual SID, which is C7Q:

Will be using actual SIDs this point forward:
Source is CRQ
Target is C7Q

I am trying to get java stack of C7Q running. ABAP is working.

Code: Select all: --------------------------------------------------- trc file: "dev_disp", trc level: 1, release: "700" --------------------------------------------------- sysno 01 sid C7Q systemid 562 (PC with Windows NT) relno 7000 patchlevel 0 patchno 185 intno 20050900 make: multithreaded, Unicode, 64 bit, optimized pid 6880 Mon May 25 14:49:39 2009 kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC) length of sys_adm_ext is 576 bytes *** SWITCH TRC-HIDE on *** ***LOG Q00=> DpSapEnvInit, DPStart (01 6880) [dpxxdisp.c 1285] shared lib "dw_xml.dll" version 185 successfully loaded shared lib "dw_xtc.dll" version 185 successfully loaded shared lib "dw_stl.dll" version 185 successfully loaded shared lib "dw_gui.dll" version 185 successfully loaded shared lib "dw_mdm.dll" version 185 successfully loaded rdisp/softcancel_sequence : -> 0,5,-1 use internal message server connection to port 3901 Mon May 25 14:49:44 2009 *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418] MtxInit: 30000 0 0 DpSysAdmExtInit: ABAP is active DpSysAdmExtInit: VMC (JAVA VM in WP) is active DpIPCInit2: start server >UT1VC7Q01_C7Q_01 < DpShMCreate: sizeof(wp_adm) 59568 (1752) DpShMCreate: sizeof(tm_adm) 58861440 (29416) DpShMCreate: sizeof(wp_ca_adm) 80000 (80) DpShMCreate: sizeof(appc_ca_adm) 160000 (80) DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080 DpShMCreate: sizeof(comm_adm) 4416080 (1088) DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064 DpShMCreate: sizeof(slock_adm) 156064 (104) DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680 DpShMCreate: sizeof(file_adm) 633680 (72) DpShMCreate: sizeof(vmc_adm) 61520 (1864) DpShMCreate: sizeof(wall_adm) (416064/346352/64/192) DpShMCreate: sizeof(gw_adm) 48 DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 65199728) DpShMCreate: allocated sys_adm at 000000000F0B0050 DpShMCreate: allocated wp_adm at 000000000F0B21F0 DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0 DpShMCreate: allocated tm_adm at 000000000F0C0B00 DpShMCreate: allocated wp_ca_adm at 00000000128E3280 DpShMCreate: allocated appc_ca_adm at 00000000128F6B00 DpShMCreate: allocated comm_adm at 000000001291DC00 DpShMCreate: allocated slock_adm at 0000000012D53E50 DpShMCreate: allocated file_adm at 0000000012D79FF0 DpShMCreate: allocated vmc_adm_list at 0000000012E14B40 DpShMCreate: allocated gw_adm at 0000000012E14BC0 DpShMCreate: allocated vmc_adm at 0000000012E14BF0 DpShMCreate: allocated ca_info at 0000000012E23C40 DpShMCreate: allocated wall_adm at 0000000012E23C50 Mon May 25 14:49:45 2009 MBUF state OFF DpCommInitTable: init table for 4000 entries DpFileInitTable: init table for 6600 entries DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432) rdisp/queue_size_check_value : -> off ThTaskStatus: rdisp/reset_online_during_debug 0 EmInit: MmSetImplementation( 2 ). MM global diagnostic options set: 0 <ES> client 0 initializing .... <ES> InitFreeList <ES> block size is 4096 kByte. Using implementation view <EsNT> Using memory model view. <EsNT> Memory Reset disabled as NT default <ES> 511 blocks reserved for free list. ES initialized. mm.dump: set maximum dump mem to 96 MB DpVmcInit2: o.k. J2EE server info start = TRUE state = STARTED pid = 6920 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=65000 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED Mon May 25 14:49:46 2009 rdisp/http_min_wait_dia_wp : 1 -> 1 ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692] Mon May 25 14:49:47 2009 ***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c 12429] DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01 <) DpStartStopMsg: start msg sent CCMS: AlInitGlobals : alert/use_sema_lock = TRUE. Mon May 25 14:49:50 2009 CCMS: Initalizing shared memory of size 60000000 for monitoring segment. CCMS: Checking Downtime Configuration of Monitoring Segment. CCMS: start to initalize 3.X shared alert area (first segment). DpJ2eeLogin: j2ee state = CONNECTED DpMsgAdmin: Set release to 7000, patchlevel 0 MBUF state PREPARED MBUF component UP DpMBufHwIdSet: set Hardware-ID ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050] DpMsgAdmin: Set patchno for this platform to 185 Release check o.K. Mon May 25 14:50:12 2009 MBUF state ACTIVE DpModState: change server state from STARTING to ACTIVE Mon May 25 14:52:01 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4521) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6920) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:52:07 2009 J2EE server info start = TRUE state = STARTED pid = 5888 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64999 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:52:41 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1076 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4674) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5888) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:52:47 2009 J2EE server info start = TRUE state = STARTED pid = 6968 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64998 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED Mon May 25 14:52:48 2009 DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:53:03 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1080 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4687) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6968) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:53:07 2009 J2EE server info start = TRUE state = STARTED pid = 5332 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64997 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:53:16 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1084 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4694) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5332) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:53:27 2009 J2EE server info start = TRUE state = STARTED pid = 1980 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64996 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:53:36 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1088 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4699) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1980) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:53:47 2009 J2EE server info start = TRUE state = STARTED pid = 4576 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64995 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:53:52 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1092 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4707) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4576) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:54:07 2009 J2EE server info start = TRUE state = STARTED pid = 5188 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64994 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:54:11 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1096 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4713) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5188) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:54:27 2009 J2EE server info start = TRUE state = STARTED pid = 6756 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64993 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:54:31 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1100 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4718) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6756) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:54:47 2009 J2EE server info start = TRUE state = STARTED pid = 5268 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64992 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:54:52 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1104 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4723) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5268) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:55:07 2009 J2EE server info start = TRUE state = STARTED pid = 540 argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[3] = -DSAPSTART=1 argv[4] = -DCONNECT_PORT=64991 argv[5] = -DSAPSYSTEM=01 argv[6] = -DSAPSYSTEMNAME=C7Q argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01 argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01 argv[9] = -DFRFC_FALLBACK=ON argv[10] = -DFRFC_FALLBACK_HOST=localhost start_lazy = 0 start_control = SAP J2EE startup framework DpJ2eeStart: j2ee state = STARTED Mon May 25 14:55:08 2009 DpJ2eeLogin: j2ee state = CONNECTED Mon May 25 14:55:27 2009 ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424] *** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1108 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4731) [nixxi.cpp 4424] DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN) DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=540) *** ERROR => DpProcKill: kill failed [dpntdisp.c 371] DpIJ2eeShutdown: j2ee state = SHUTDOWN Mon May 25 14:55:47 2009 DpEnvCheckJ2ee: switch off j2ee start flag

by **yatinbhatt** » Mon May 25, 2009 2:05 pm

Ok,

What specific changes you did for J2EE to work so far ?

When you start configtool, do you get any error like unable to connect to the database ? Or any other error ?

thanks
Yatin

by **One_Idea** » Mon May 25, 2009 2:49 pm

Hi Yatin,

I am not able to log on to Config tool but I cannot use default DB settings. I have to change System Name from C7Q to CRQ to make it work, each and every time I connect configtool. I have made changes in all propoerties of Bootstrap properties, Instance properties, and all the entries in Configtool.

So, in a way I get an error while connecting but on the other hand if I change the System name then it works (it could be becaue the DB SID is still CRQ, could it?).

Shival

by **One_Idea** » Mon May 25, 2009 3:00 pm

Please read following

I am not able to log on to Config tool but I cannot use default DB settings.

as

I am not able to log on to Configtool IF i use default DB settings.

Sorry for the confusion.

by **yatinbhatt** » Mon May 25, 2009 3:02 pm

Shival,

You are confusing me ? Which property in configtool you are changing all the time ? Basically, when you have a different SAP<SID>DB in use than the one you copied from, you have to change the J2EE schema name in the JDBC properties in SecureStore and save the entries in configtool, that way it is permanently stored.

Also, when you start the j2ee instance with different properties, make sure you delete the files with extension "vmprop" which came from old server and then next startup they will be created again.

Also, please paste screen shot of configtool when are you are able to successfully pass the SecureStore login.

Thanks
Yatin

SID and Java Instance ID related dilema during System Copy

Re: SID and Java Instance ID related dilema during System Copy

Re: SID and Java Instance ID related dilema during System Copy

Re: SID and Java Instance ID related dilema during System Copy

Re: SID and Java Instance ID related dilema during System Copy

Re: SID and Java Instance ID related dilema during System Copy

Who is online